Microsoft Windows 2000 Server Interview Questions »
________________________________________________________________________________
1. To install Windows 2000 Server from MS-DOS you should run?
A. setup.exe from I386 folder on your CD
B. setup32.exe from I386 folder on your CD
C. winnt.exe from I386 folder on your CD
D. winnt32.exe from I386 folder on your CD
2. You want to install Windows 2000 Server on an older computer to be used as a print server. The computer is a Pentium 166 with 128mb of RAM. You have installed a new 20GB hard drive that hasn`t been formatted. The computer has a CD-ROM drive, but you`re unable to boot from the CD. How can you install Windows 2000 Server on this computer?
A. Replace the CD-ROM drive with one that supports bootable CDs.
B. Use the boot disk that shipped with Windows 2000
C. On another computer, run makeboot.exe to create the setup boot disks.
D. On another computer, run winnt.exe with the /ox option to create a set of bootable floppy disks.
3.You were asked to upgrade the following machines to Windows 2000 Servers:
1. Windows NT 3.51
2. Windows NT 3.51 with Citrix
3. Windows NT 4.0
4. Microsoft BackOffice Small Business Server
How many machines will be successfully upgraded?
A. 1
B. 2
C. 3
D. 4
4. Is it possible to specify third-party drivers during unattended installation of Windows 2000 Server?
A. Yes
B. No
5. You want to install Windows 2000 Server on one of your servers and make it a Domain Controller.How can you do that?
A. Run install as following: setup /mode dc
B. Run install as following: setup /mode pdc
C. Run install as following: setup /type dc
D. Run install as following: setup /type pdc
E. Perform regular installation and run dcpromo from the command line
6.How could you check that your existing system software and hardware are compatible for Windows 2000 Upgrade? (Choose all that apply)
A. Run winnt32 /chkupg
B. Run winnt32 /checkupgradeonly
C. Run chkupgrd.exe D. Run chkupg.exe
7. You need to upgrade your Windows NT 4.0 Server to Windows 2000 Server. The Windows 2000 server setup files are on one of the network servers in your LAN.How should you perform this upgrade?
A. While in Windows NT 4.0 run winnt.exe from network server
B. While in Windows NT 4.0 run winnt32.exe from network server
C. Start up your server in MS-DOS mode and run winnt.exe from network server
D. Start up your server in MS-DOS mode and run winnt32.exe from network server
8. Which of the following services must run on Windows 2000 Server to enable Internet Printing feature?
A. Microsoft Printing Services
B. Microsoft IIS
C. Microsoft SMTP Service
D. None of the above
9. Mike is a member of Special_Operators group on MachineA.
Special_Operators granted “Full Control” on folder c:\special. “Full Control” permissions on Special.txt file found in c:\special folder granted to Administrators group.
What will happen when Mike will try to delete c:\special folder?
A. Folder will be deleted
B. Error message will pop up, notifying that Mike doesn`t have enough permissions to delete Special.txt file
C. All files except Special.txt will be deleted from c:\special folder
D. Folder will be deleted, Special.txt will be moved to Recycle Bin
10. One of Win95-based clients tries to access a Distributed File System on a Windows 2000 Server, but he unable to see the DFS at all. Why?
A. Windows 95 clients can not use DFS
B. DFS Client should be installed on Windows 95
C. Special patch should be installed on Windows 2000 Server to accommodate Windows 95 clients
D. Distributed File System on Windows 2000 Server is domain-based. Windows 95 clients may only stand-alone DFS`s
11. If you move a file aaa.txt which has Full Control permissions for Administrator from c:\test1 to c:\test2, the file keeps its original permissions, while moving it to d:\test2 file assigned new permissions, which is Read for Administrator. Why?
A. c:\test2 has Full Control permissions while d:\test2 doesn`t have Full Control permissions, so the file assigned Read permissions by default
B. c:\test2 is on the same partition as c:\test1 while d:\test2 is not
C. It`s not possible. aaa.txt file will keep its original permissions anyway
12.Windows 2000 Domain-based Distributed File System is fault-tolerant.
A. True
B. False
13. You are configuring your Telnet Service on Windows 2000 Server, trying to allow 3 simultaneous users to use Telnet services. You change value of MaxConnections to 3 under HKEY_LOCAL_MACHINE\Software\Microsoft\TelnetServer\1.0 key in the registry, and then stop and restart Telnet Service. Now 3 users try to connect to the Telnet Server but only two of them succeed. Why?
A. You should change the value of MaxConnections under HKEY_LOCAL_MACHINE\Software\Microsoft\TelnetServer\1.0\Performance key
B. Windows 2000 Telnet Server is limited to two simultaneous connections
C. MaxConnections is not a value considered by Telnet Server
14. Fixprnsv utility shipping with Windows 2000 Server is used to: (Choose all that apply)
A. Scan the Print Server for Incompatible Printer Drivers
B. Install Printer Drivers
C. Replace Incompatible Printer Drivers
D. None of the above
15.You moved aaa.txt file which is encrypted from c:\test1 to c:\test2. After that you noticed, that the file is not encrypted anymore. Why?
A. c:\test2 is not encrypted folder
B. moving encrypted files makes them not encrypted
C. c:\test2 is a compressed folder
D. None of the above
16. You are trying to share c:\test folder on your computer, but unable to do that. Why?
A. This folder is marked as hidden on your computer
B. This folder is encrypted
C. This folder is compressed
D. This folder is marked as system on your computer
E. None of the above
17.Is it possible to logon to Windows 2000 Telnet Server using encrypted password?
A. Yes
B. No
18. You just added a second CPU to your Windows 2000 Server. You open task manager and notice that it looks like you have only one CPU on your Server. Why?
A. Computer Driver must be updated in Device Manager in order to let Windows know, you have now 2 CPU`s
B. Uptomp.exe should be executed in order to let Windows know, you have now 2 CPU`s
C. Computer must be rebooted
D. This motherboard doesn`t support 2 CPU`s
19. You’ve just installed network adapter on your Windows 2000 Server machine. At the end of the NIC installation you were asked to reboot your machine. After that the machine couldn`t boot. What is the easiest way to boot your machine?
A. You have to repair the installation of Windows 2000 Server, using the setup CD-ROM
B. Boot in safe mode
C. Boot in safe mode with network support
D. Remove the NIC
20. Windows 2000 supports Asymmetric Multiprocessing
A. True
B. False
21. You want your system protected files to be checked by System File Checker tool at the next system boot. How should you run the scf.exe?
A. scf /scannow
B. scf /scanonce
C. scf /scanboot
D. scf /enable
22. How can you check that system files weren`t corrupted, modified or affected by a virus?
A. By running scandisk.exe
B. By running Norton AntiVirus
C. By running sigverif.exe
23. Which of the following will improve overall system performance?
A. Create additional pagefile on boot partition
B. Create additional pagefile on non-boot partition
C. Create additional pagefile on its own partition
D. Move pagefile to non-boot partition
E. Move pagefile to its own partition
24. Using Performance monitor, which of the following pairs (object->counter) indicate you should consider faster or additional CPU for your Single-CPU Windows 2000 Server? (Choose all that apply)
A. Processor -> %Processor Time
B. System -> %Processor Time
C. Server -> Pool Nonpaged Failures
D. Server -> Pool Paged Failures
E. System -> Processor Queue Length
F. Processor -> Interrupts/sec
25. Which of the following counters in Performance monitor may indicate physical disk failures?
A. Physical Disk -> Average Disk sec/Transfer
B. Physical Disk -> %Disk Time
C. Physical Disk -> Disk Bytes/sec
26. You want to create a performance alert that will notify you each time Processor -> %Processor Time counter equals 95%. How should you do that?
A. Using Performance Tool. Create new alert, add Processor -> %Processor Time counter and choose Limit to 95.
B. Using Performance Tool. Add Processor -> %Processor Time counter to the System Monitor. Then right click it and set Limit to 95.
C. It is not possible
27. When a damaged version of system protected file is detected by WFP, it`s replaced by original file from the following folder:
A. winnt\system32\origdll
B. winnt\system32\sysbackup
C. winnt\system32\sysdll
D. winnt\system32\dllcache
28. Using Performance monitor, which of the following pairs (object->counter) indicate you need to increase to your Windows 2000 Server Paging File (Virtual Memory)? (Choose all that apply)
A. Memory -> Pages/sec
B. Server -> Pool Nonpaged Failures
C. Server -> Pool Paged Failures
D. Server -> Pool Nonpaged Peak
29. What is the highest thread priority level?
A. 0
B. 1
C. 16
D. 31
E. 64
30. Which of the following may be set to run when an alert is triggered? (Choose all that apply)
A. Send Email
B. Send Page
C. Send Network Message
D. Run an external program
E. Log entry in Application Event Log F. Log entry in System Event Log
31. When performing a system state backup in Windows 2000 Server. Which of the following backed up on a Domain controller but are not on a Non-Domain controller Servers? (Choose all that apply)
A. Active Directory (NTDS)
B. Boot Files
C. COM+ class registration database
D. Registry
E. System Volume (SYSVOL)
32. Using Performance monitor, which of the following pairs (object->counter) indicate you need to add more Physical Memory to your Windows 2000 Server? (Choose all that apply)
A. Memory -> Pages/sec
B. Server -> Pool Nonpaged Failures
C. Server -> Pool Paged Failures
D. Server -> Pool Nonpaged Peak
33. You have created a Performance Alert using Performance Tool. You want to get counter data every 100 ms.
How can you do that?
A. In the General page choose sample data every: Interval = 100 , Units = ms
B. In the General page choose sample data every: Interval = 0.1 , Units = s
C. In the Schedule page choose sample data every: Interval = 100 , Units = ms
D. In the Schedule page choose sample data every: Interval = 0.1 , Units = s
E. It is not possible
34. You want to move file c:\uncompressed\test.txt to c:\compressed folder. Test.txt is uncompressed file, while c:\compressed is a NTFS compressed folder. What will be the reaction of operating system, when you move this file?
A. test.txt will be compressed once in c:\compressed folder
B. test.txt will remain uncompressed after the move
C. You will be asked to compress the file before moving it to compressed folder
D. Operating system will first compress the file and then move it into compressed folder
35. How can you upgrade a Basic Disk to Dynamic Disk in Windows 2000 installed on your laptop computer?
A. Only during installation of Windows 2000
B. Using Disk Management Snap-In
C. It`s not possible
36. Which of the following volumes support Disk Quotas? (Choose all that apply)
A. FAT16
B. FAT32
C. NTFS
D. CDFS
37. You want to move file d:\uncompressed\test.txt to c:\compressed folder. Test.txt is uncompressed file, while c:\compressed is a NTFS compressed folder. What will be the reaction of operating system, when you move this file?
A. test.txt will be compressed once in c:\compressed folder
B. test.txt will remain uncompressed after the move
C. You will be asked to compress the file before moving it to compressed folder
38. What is faster. Copying a file from a compressed or not compressed NTFS volume?
A. Compressed
B. Not Compressed
C. The same
39. You were asked to set Disk Quotas to all users of Marketing group in your Domain. How should you do that?
A. Enable Quota Management and assign Disk Quota to Marketing group
B. Assign Disk Quota to Marketing group
C. Enable Quota Management and assign Disk Quota to each member of Marketing group
D. Assign Disk Quota to each member of Marketing group
40. When you add a new hard disk to Windows 2000 it is added by default as?
A. Basic Disk
B. Dynamic Disk
C. Extended Disk
D. Logical Drive
41. Which of the following statements are true for L2TP protocol? (Choose all that apply)
A. Has header compression
B. Has tunnel authentication
C. Has Built-in encryption
D. May transmit data over UDP connections
42. What does PPTP stand for?
A. Peer to Peer Transfer Protocol
B. Point to Point Transfer Protocol
C. Point to Point Tunneling Protocol
D. Peer to Peer Tunneling Protocol
43. You have installed corporate Win2K RAS server. Users dial-up to the server, and then server calls them back and establishes connection. Users of the RAS server complain when they connect to the server using multiple modems (Multilink), the RAS server calls back and establishes the connection, but only one modem is used. What is the problem? You create a new dial-up connection on your Win2K Pro to connect to a RAS server. You configure this connection to use both of your external modems and to use multilink to bind the modems together. When establishing connection to the RAS server, you notice that only one of the modems is used. What should you do? (Choose all that apply)
A. Multilink disabled on RAS Server
B. Callback disables multilink
C. None of the above
44. Which of the following IP addresses may be assigned by Automatic Private IP Addressing to a DHCP client, when the client is unable to obtain IP address? (Choose all that apply)
A. 127.0.0.1
B. 192.255.255.255
C. 169.254.224.224
D. 128.232.230.12
45. You install a second modem on a Windows 2000 Server computer configured with Routing and Remote Access. Dial-in users report that they are unable to connect to the server by using this new modem. What can you do to help find out the cause of the problem? (Choose Three)
A. Use the Diagnostics tab in Phone and Modem Options in Control Panel to query the modem
B. From a command prompt, run the Net Config Server command
C. Use the Routing and Remote Access snap-in to find out whether the ports for both modems are operational
D. From a command prompt, run the Net Statistics command
E. Use Device Manager to identify any port resource conflicts
46. How can you identify the IP address assigned to a machine SERVER_A by a DHCP server? (Choose all that apply)
A. ping localhost
B. ipconfig
C. ping server_a
D. ping SERVER_A
47. Which of the following settings may be provided by DHCP Server to DHCP clients in addition to IP Address and subnet mask? (Choose all that apply)
A. DNS Servers
B. Exchange Servers
C. Proxy Servers
D. WINS Servers
E. Default Gateways
F. SMTP Servers
48. You configure several Group Policies to restrict user`s desktop settings. You want them to be applied immediately. What should you do?
A. Run secedit /refreshpolicy USER_POLICY
B. Run secedit /refreshpolicy MACHINE_POLICY
C. Run refresh /DOMAIN_POLICY
D. Run net config /refreshpolicy DOMAIN_POLICY
49. You`re the system administrator in a financial company. Currently all software developers are running Windows 98. Your IT manager decides to upgrade developers machines to Windows 2000 Server. Developers will need to test their code in both Windows 98 environment and Windows 2000 environment. What file system would be optimal and will enable developers to test their code in both environments?
A. FAT32
B. FAT16
C. NTFS 4
D. NTFS 5
50. Is it possible to encrypt a compressed file?
A. Yes
B. No
51. The default encryption key in Win2K EFS is?
A. 16 bit
B. 32 bit
C. 56 bit
D. 128 bit
1. To install Windows 2000 Server from MS-DOS you should run?
A. setup.exe from I386 folder on your CD
B. setup32.exe from I386 folder on your CD
C. winnt.exe from I386 folder on your CD
D. winnt32.exe from I386 folder on your CD
2. You want to install Windows 2000 Server on an older computer to be used as a print server. The computer is a Pentium 166 with 128mb of RAM. You have installed a new 20GB hard drive that hasn`t been formatted. The computer has a CD-ROM drive, but you`re unable to boot from the CD. How can you install Windows 2000 Server on this computer?
A. Replace the CD-ROM drive with one that supports bootable CDs.
B. Use the boot disk that shipped with Windows 2000
C. On another computer, run makeboot.exe to create the setup boot disks.
D. On another computer, run winnt.exe with the /ox option to create a set of bootable floppy disks.
3.You were asked to upgrade the following machines to Windows 2000 Servers:
1. Windows NT 3.51
2. Windows NT 3.51 with Citrix
3. Windows NT 4.0
4. Microsoft BackOffice Small Business Server
How many machines will be successfully upgraded?
A. 1
B. 2
C. 3
D. 4
4. Is it possible to specify third-party drivers during unattended installation of Windows 2000 Server?
A. Yes
B. No
5. You want to install Windows 2000 Server on one of your servers and make it a Domain Controller.How can you do that?
A. Run install as following: setup /mode dc
B. Run install as following: setup /mode pdc
C. Run install as following: setup /type dc
D. Run install as following: setup /type pdc
E. Perform regular installation and run dcpromo from the command line
6.How could you check that your existing system software and hardware are compatible for Windows 2000 Upgrade? (Choose all that apply)
A. Run winnt32 /chkupg
B. Run winnt32 /checkupgradeonly
C. Run chkupgrd.exe D. Run chkupg.exe
7. You need to upgrade your Windows NT 4.0 Server to Windows 2000 Server. The Windows 2000 server setup files are on one of the network servers in your LAN.How should you perform this upgrade?
A. While in Windows NT 4.0 run winnt.exe from network server
B. While in Windows NT 4.0 run winnt32.exe from network server
C. Start up your server in MS-DOS mode and run winnt.exe from network server
D. Start up your server in MS-DOS mode and run winnt32.exe from network server
8. Which of the following services must run on Windows 2000 Server to enable Internet Printing feature?
A. Microsoft Printing Services
B. Microsoft IIS
C. Microsoft SMTP Service
D. None of the above
9. Mike is a member of Special_Operators group on MachineA.
Special_Operators granted “Full Control” on folder c:\special. “Full Control” permissions on Special.txt file found in c:\special folder granted to Administrators group.
What will happen when Mike will try to delete c:\special folder?
A. Folder will be deleted
B. Error message will pop up, notifying that Mike doesn`t have enough permissions to delete Special.txt file
C. All files except Special.txt will be deleted from c:\special folder
D. Folder will be deleted, Special.txt will be moved to Recycle Bin
10. One of Win95-based clients tries to access a Distributed File System on a Windows 2000 Server, but he unable to see the DFS at all. Why?
A. Windows 95 clients can not use DFS
B. DFS Client should be installed on Windows 95
C. Special patch should be installed on Windows 2000 Server to accommodate Windows 95 clients
D. Distributed File System on Windows 2000 Server is domain-based. Windows 95 clients may only stand-alone DFS`s
11. If you move a file aaa.txt which has Full Control permissions for Administrator from c:\test1 to c:\test2, the file keeps its original permissions, while moving it to d:\test2 file assigned new permissions, which is Read for Administrator. Why?
A. c:\test2 has Full Control permissions while d:\test2 doesn`t have Full Control permissions, so the file assigned Read permissions by default
B. c:\test2 is on the same partition as c:\test1 while d:\test2 is not
C. It`s not possible. aaa.txt file will keep its original permissions anyway
12.Windows 2000 Domain-based Distributed File System is fault-tolerant.
A. True
B. False
13. You are configuring your Telnet Service on Windows 2000 Server, trying to allow 3 simultaneous users to use Telnet services. You change value of MaxConnections to 3 under HKEY_LOCAL_MACHINE\Software\Microsoft\TelnetServer\1.0 key in the registry, and then stop and restart Telnet Service. Now 3 users try to connect to the Telnet Server but only two of them succeed. Why?
A. You should change the value of MaxConnections under HKEY_LOCAL_MACHINE\Software\Microsoft\TelnetServer\1.0\Performance key
B. Windows 2000 Telnet Server is limited to two simultaneous connections
C. MaxConnections is not a value considered by Telnet Server
14. Fixprnsv utility shipping with Windows 2000 Server is used to: (Choose all that apply)
A. Scan the Print Server for Incompatible Printer Drivers
B. Install Printer Drivers
C. Replace Incompatible Printer Drivers
D. None of the above
15.You moved aaa.txt file which is encrypted from c:\test1 to c:\test2. After that you noticed, that the file is not encrypted anymore. Why?
A. c:\test2 is not encrypted folder
B. moving encrypted files makes them not encrypted
C. c:\test2 is a compressed folder
D. None of the above
16. You are trying to share c:\test folder on your computer, but unable to do that. Why?
A. This folder is marked as hidden on your computer
B. This folder is encrypted
C. This folder is compressed
D. This folder is marked as system on your computer
E. None of the above
17.Is it possible to logon to Windows 2000 Telnet Server using encrypted password?
A. Yes
B. No
18. You just added a second CPU to your Windows 2000 Server. You open task manager and notice that it looks like you have only one CPU on your Server. Why?
A. Computer Driver must be updated in Device Manager in order to let Windows know, you have now 2 CPU`s
B. Uptomp.exe should be executed in order to let Windows know, you have now 2 CPU`s
C. Computer must be rebooted
D. This motherboard doesn`t support 2 CPU`s
19. You’ve just installed network adapter on your Windows 2000 Server machine. At the end of the NIC installation you were asked to reboot your machine. After that the machine couldn`t boot. What is the easiest way to boot your machine?
A. You have to repair the installation of Windows 2000 Server, using the setup CD-ROM
B. Boot in safe mode
C. Boot in safe mode with network support
D. Remove the NIC
20. Windows 2000 supports Asymmetric Multiprocessing
A. True
B. False
21. You want your system protected files to be checked by System File Checker tool at the next system boot. How should you run the scf.exe?
A. scf /scannow
B. scf /scanonce
C. scf /scanboot
D. scf /enable
22. How can you check that system files weren`t corrupted, modified or affected by a virus?
A. By running scandisk.exe
B. By running Norton AntiVirus
C. By running sigverif.exe
23. Which of the following will improve overall system performance?
A. Create additional pagefile on boot partition
B. Create additional pagefile on non-boot partition
C. Create additional pagefile on its own partition
D. Move pagefile to non-boot partition
E. Move pagefile to its own partition
24. Using Performance monitor, which of the following pairs (object->counter) indicate you should consider faster or additional CPU for your Single-CPU Windows 2000 Server? (Choose all that apply)
A. Processor -> %Processor Time
B. System -> %Processor Time
C. Server -> Pool Nonpaged Failures
D. Server -> Pool Paged Failures
E. System -> Processor Queue Length
F. Processor -> Interrupts/sec
25. Which of the following counters in Performance monitor may indicate physical disk failures?
A. Physical Disk -> Average Disk sec/Transfer
B. Physical Disk -> %Disk Time
C. Physical Disk -> Disk Bytes/sec
26. You want to create a performance alert that will notify you each time Processor -> %Processor Time counter equals 95%. How should you do that?
A. Using Performance Tool. Create new alert, add Processor -> %Processor Time counter and choose Limit to 95.
B. Using Performance Tool. Add Processor -> %Processor Time counter to the System Monitor. Then right click it and set Limit to 95.
C. It is not possible
27. When a damaged version of system protected file is detected by WFP, it`s replaced by original file from the following folder:
A. winnt\system32\origdll
B. winnt\system32\sysbackup
C. winnt\system32\sysdll
D. winnt\system32\dllcache
28. Using Performance monitor, which of the following pairs (object->counter) indicate you need to increase to your Windows 2000 Server Paging File (Virtual Memory)? (Choose all that apply)
A. Memory -> Pages/sec
B. Server -> Pool Nonpaged Failures
C. Server -> Pool Paged Failures
D. Server -> Pool Nonpaged Peak
29. What is the highest thread priority level?
A. 0
B. 1
C. 16
D. 31
E. 64
30. Which of the following may be set to run when an alert is triggered? (Choose all that apply)
A. Send Email
B. Send Page
C. Send Network Message
D. Run an external program
E. Log entry in Application Event Log F. Log entry in System Event Log
31. When performing a system state backup in Windows 2000 Server. Which of the following backed up on a Domain controller but are not on a Non-Domain controller Servers? (Choose all that apply)
A. Active Directory (NTDS)
B. Boot Files
C. COM+ class registration database
D. Registry
E. System Volume (SYSVOL)
32. Using Performance monitor, which of the following pairs (object->counter) indicate you need to add more Physical Memory to your Windows 2000 Server? (Choose all that apply)
A. Memory -> Pages/sec
B. Server -> Pool Nonpaged Failures
C. Server -> Pool Paged Failures
D. Server -> Pool Nonpaged Peak
33. You have created a Performance Alert using Performance Tool. You want to get counter data every 100 ms.
How can you do that?
A. In the General page choose sample data every: Interval = 100 , Units = ms
B. In the General page choose sample data every: Interval = 0.1 , Units = s
C. In the Schedule page choose sample data every: Interval = 100 , Units = ms
D. In the Schedule page choose sample data every: Interval = 0.1 , Units = s
E. It is not possible
34. You want to move file c:\uncompressed\test.txt to c:\compressed folder. Test.txt is uncompressed file, while c:\compressed is a NTFS compressed folder. What will be the reaction of operating system, when you move this file?
A. test.txt will be compressed once in c:\compressed folder
B. test.txt will remain uncompressed after the move
C. You will be asked to compress the file before moving it to compressed folder
D. Operating system will first compress the file and then move it into compressed folder
35. How can you upgrade a Basic Disk to Dynamic Disk in Windows 2000 installed on your laptop computer?
A. Only during installation of Windows 2000
B. Using Disk Management Snap-In
C. It`s not possible
36. Which of the following volumes support Disk Quotas? (Choose all that apply)
A. FAT16
B. FAT32
C. NTFS
D. CDFS
37. You want to move file d:\uncompressed\test.txt to c:\compressed folder. Test.txt is uncompressed file, while c:\compressed is a NTFS compressed folder. What will be the reaction of operating system, when you move this file?
A. test.txt will be compressed once in c:\compressed folder
B. test.txt will remain uncompressed after the move
C. You will be asked to compress the file before moving it to compressed folder
38. What is faster. Copying a file from a compressed or not compressed NTFS volume?
A. Compressed
B. Not Compressed
C. The same
39. You were asked to set Disk Quotas to all users of Marketing group in your Domain. How should you do that?
A. Enable Quota Management and assign Disk Quota to Marketing group
B. Assign Disk Quota to Marketing group
C. Enable Quota Management and assign Disk Quota to each member of Marketing group
D. Assign Disk Quota to each member of Marketing group
40. When you add a new hard disk to Windows 2000 it is added by default as?
A. Basic Disk
B. Dynamic Disk
C. Extended Disk
D. Logical Drive
41. Which of the following statements are true for L2TP protocol? (Choose all that apply)
A. Has header compression
B. Has tunnel authentication
C. Has Built-in encryption
D. May transmit data over UDP connections
42. What does PPTP stand for?
A. Peer to Peer Transfer Protocol
B. Point to Point Transfer Protocol
C. Point to Point Tunneling Protocol
D. Peer to Peer Tunneling Protocol
43. You have installed corporate Win2K RAS server. Users dial-up to the server, and then server calls them back and establishes connection. Users of the RAS server complain when they connect to the server using multiple modems (Multilink), the RAS server calls back and establishes the connection, but only one modem is used. What is the problem? You create a new dial-up connection on your Win2K Pro to connect to a RAS server. You configure this connection to use both of your external modems and to use multilink to bind the modems together. When establishing connection to the RAS server, you notice that only one of the modems is used. What should you do? (Choose all that apply)
A. Multilink disabled on RAS Server
B. Callback disables multilink
C. None of the above
44. Which of the following IP addresses may be assigned by Automatic Private IP Addressing to a DHCP client, when the client is unable to obtain IP address? (Choose all that apply)
A. 127.0.0.1
B. 192.255.255.255
C. 169.254.224.224
D. 128.232.230.12
45. You install a second modem on a Windows 2000 Server computer configured with Routing and Remote Access. Dial-in users report that they are unable to connect to the server by using this new modem. What can you do to help find out the cause of the problem? (Choose Three)
A. Use the Diagnostics tab in Phone and Modem Options in Control Panel to query the modem
B. From a command prompt, run the Net Config Server command
C. Use the Routing and Remote Access snap-in to find out whether the ports for both modems are operational
D. From a command prompt, run the Net Statistics command
E. Use Device Manager to identify any port resource conflicts
46. How can you identify the IP address assigned to a machine SERVER_A by a DHCP server? (Choose all that apply)
A. ping localhost
B. ipconfig
C. ping server_a
D. ping SERVER_A
47. Which of the following settings may be provided by DHCP Server to DHCP clients in addition to IP Address and subnet mask? (Choose all that apply)
A. DNS Servers
B. Exchange Servers
C. Proxy Servers
D. WINS Servers
E. Default Gateways
F. SMTP Servers
48. You configure several Group Policies to restrict user`s desktop settings. You want them to be applied immediately. What should you do?
A. Run secedit /refreshpolicy USER_POLICY
B. Run secedit /refreshpolicy MACHINE_POLICY
C. Run refresh /DOMAIN_POLICY
D. Run net config /refreshpolicy DOMAIN_POLICY
49. You`re the system administrator in a financial company. Currently all software developers are running Windows 98. Your IT manager decides to upgrade developers machines to Windows 2000 Server. Developers will need to test their code in both Windows 98 environment and Windows 2000 environment. What file system would be optimal and will enable developers to test their code in both environments?
A. FAT32
B. FAT16
C. NTFS 4
D. NTFS 5
50. Is it possible to encrypt a compressed file?
A. Yes
B. No
51. The default encryption key in Win2K EFS is?
A. 16 bit
B. 32 bit
C. 56 bit
D. 128 bit
0 Response to "Microsoft Windows 2000 Server Interview Questions »"
Post a Comment